How Much Does It Cost to Shrink Wrap a Boat?

bioaqualife: Several boats are lined up on land, covered in protective white shrink wrap, elevated on blocks, with orange traffic cones placed in front of them. The sky is clear and blue.

Last updated: November 13, 2026

Quick answer: Professional boat shrink wrapping typically runs $15 to $30 per linear foot, so a 25-foot boat often lands between $375 and $750 before add-ons. The biggest cost swings come from boat height, frame complexity, vents, doors and your region. DIY materials alone usually run $350 to $1,000, not counting your time.

What Determines the Cost of Shrink Wrapping a Boat

Length is the starting point for almost every quote, but it is not the only number that matters. A 25-foot boat with a tall T-top or tower needs more film and more frame work than a 25-foot boat with a low profile, and that difference shows up directly in the price.

Here is what actually moves a quote up or down:

  • Length and beam. More surface area means more film and more labor.
  • Height. A T-top, tower, mast or flybridge adds frame work and film that a flat-deck boat does not need.
  • Frame complexity. Custom support framing around antennas, outriggers or swim platforms takes extra time to build correctly.
  • Ventilation. Vents are not optional. A larger enclosed space needs more of them, and cutting and fitting each one adds labor time.
  • Doors. A zipper door for winter access is usually an add-on, not a default inclusion.
  • Region. Labor and material costs vary by state, and coastal or high-demand areas often run higher than inland shops.

Typical Prices by Boat Size

Professional per-foot pricing across the US generally falls in the $12 to $35 range, with most marinas and shops clustering around $15 to $30 per foot depending on region and boat type.

Boat Length Typical Professional Price What's Usually Included
Up to 20 ft $240 - $500 Wrap, frame, vents where needed
21-26 ft $375 - $750 Wrap, tower/T-top allowance, vents where needed
27-35 ft $600 - $1,200 Wrap, tower/T-top allowance, multiple vents
36 ft+ $1,000 - $1,750+ Wrap, complex frame, vents where needed; zipper door often extra

Prices checked: October 2026.

Regional pricing varies more than the national range suggests. A 2026 roundup of dealer pricing found Indiana shops charging $22-$30 per foot and a Wisconsin dealer at a flat $30 per foot, while one Maine marina charges a flat $950 for trailer-stored boats. Certified bioPRO® installers publish their own rates too. In northern Michigan, Turf Titans Property Management lists mobile shrink wrapping at $18 per foot with conventional film and $21 per foot with bioWRAP® (fall 2026). On Long Island, Biodegradable Shrink Wrap LI starts boats at $17 per foot, including vents and a moisture absorber. High-demand coastal markets such as New Jersey tend to sit at the upper end of the national range. For a local quote with biodegradable film, find a certified bioPRO® installer near you.

A quote with no line items is harder to compare than one that breaks out frame, film, vents and disposal separately, so ask for the breakdown before assuming one number tells the whole story.

What a Professional Quote Includes (and What It Doesn't)

A typical professional quote covers the frame build, the film and tape, and the heat-shrinking labor, plus ventilation where the boat needs it. What it often does not cover, unless you ask directly, is a zipper access door, any vents beyond what the job calls for, and removal and disposal in spring.

That last one catches a lot of boat owners off guard. Removal and disposal is frequently billed as a separate line item, sometimes months after the original wrap quote, at a rate that was never mentioned up front.

DIY Shrink Wrap Costs

Doing it yourself trades labor cost for material cost, plus your own time and the learning curve of a first attempt. Here is what you are buying:

Item What It's For
Shrink wrap film The outer protective shell, sized to your boat's dimensions
Shrink wrap tape Seals seams and secures the film to the frame
Heat gun or propane torch Shrinks the film tight around the frame
Ventilation kit Vents prevent moisture buildup and mildew inside the wrap
Support straps or webbing Reinforces the frame at stress points
Zipper door kit Allows access without cutting the wrap open

Total DIY material costs typically run $350 to $1,000 per boat, depending on boat size. That does not include the heat tool itself if you don't already own one, or the hours it takes to do the job correctly on a first attempt.

The Hidden Cost: Removal and Disposal

Removal and disposal is the line item most boat owners forget to budget for. Some marinas bill it separately per foot, others fold it into a flat spring fee, and some charge nothing if you remove the wrap yourself and bag it for pickup.

Before you commit to a quote, ask specifically what happens to the film once the season ends and whether that service is included or billed separately.

Total Cost: Conventional vs. Biodegradable Wrap

Material cost is only one part of the total project cost. Installation labor, add-ons such as a zipper door, and the removal and disposal of the film at the end of the season all factor into what a season of shrink wrapping actually costs a marina or a boat owner over time.

bioWRAP® underwent independent ASTM D5511 testing with an incubation period of 1,130 days. Under these simulated landfill (anaerobic, high-solids) conditions, the material reached 80.2% biodegradation, verified by an independent third-party lab (Eden Research Laboratory). Actual results in real-world landfills vary with temperature, moisture and waste composition. The full ASTM D5511 test report is available to review.

Rather than estimate savings here, run your own numbers with the shrink wrap cost calculator, which factors in material, installation and disposal variables specific to your boat and region.

How to Lower Your Shrink Wrap Bill

A few practical moves can bring the total down without cutting corners on protection:

  • Choose the wrap with the full cycle in mind. The film itself can cost more per roll, but a landfill-biodegradable film such as bioWRAP® typically installs with less heat, propane and tape, and it goes out with regular solid waste in spring, so over the full cycle it can cost less than conventional wrap. Compare the full-cycle numbers, not just the per-foot price.
  • Book early. Shops often charge a premium for last-minute fall slots when demand peaks.
  • Ask about group rates. Marinas sometimes offer a lower per-foot rate when several boats in the same slip row are wrapped together.
  • Reuse your door. A reusable bioDOOR™ zipper door can be removed and reinstalled across seasons instead of rebuilding a zipper access point from scratch every year.
  • Compare the full quote, not just the per-foot rate. A lower headline price with disposal billed separately can end up costing more than a higher all-in quote.

If you are weighing whether to handle the job yourself, DIY vs. professional shrink wrapping breaks down the time, skill and risk trade-offs in more detail. And once the season ends, it is worth knowing what happens to shrink wrap after the season before you assume the wrap just disappears.

For boat owners weighing a starter investment in DIY equipment, the bioKIT® starter kit bundles the core tools needed for a first wrap job.

Frequently Asked Questions

Is shrink wrapping a boat worth the cost?

For most boats stored outdoors through a cold or wet winter, yes. The cost of a professional wrap is usually far less than the cost of fixing moisture damage, mildew or UV-related wear from an uncovered season.

How much does it cost to shrink wrap a pontoon boat?

Pontoon boats typically fall in the same per-foot range as other boats, roughly $15-$25 per foot, though their wider deck and rail structure can sometimes add to frame labor.

Is it cheaper to shrink wrap a boat yourself?

Usually, yes, on materials alone. A full set of DIY supplies (film, tape, vents and frame materials) runs $350-$1,000 depending on boat size, versus $375-$1,200+ for a professional job on a mid-size boat. That gap does not account for your own time or the risk of a flawed first attempt.

Do marinas charge extra to remove shrink wrap?

Often, yes. Removal and disposal is frequently billed as a separate charge, sometimes a flat spring fee and sometimes a per-foot rate. Always ask whether it is included in the original quote.

Does biodegradable shrink wrap cost more than regular wrap?

Material pricing varies by supplier and gauge. The more useful comparison is total project cost, including installation time and disposal, which a pricing calculator can estimate for your specific boat.