We’re often asked the question. How do you install bioWRAP®? And is there anything we need to do differently when making the switch?
The short answer is NO. But there are subtle differences!
To help you maximise the benefits, we have put together this installation demo, sharing some professional tips & tricks!
Step-by-Step Guide:
Measuring & Cutting
Each bioWRAP® roll features a printed Centerline that doubles as an integrated measuring tape. With clear marks every 2 feet, you can accurately pull the correct length of material you need from each roll without having to stretch out the film to measure and eliminate all guesswork.
Pro tip: Simply count the marks: 9 marks equals 18 feet of bioWRAP®.
Simple Alignment
The Centerline also serves as a visual reference during installation, allowing installers to easily see if the film is centered over the objects they are covering.
Superior Welding
Welding seams with bioWRAP® requires less heat, resulting in a faster workflow than with traditional alternatives. These welds are exceptionally durable and, once properly set, they will not open up, eliminating the need to tape the seams!
Shrinking the film
Our bioWRAP® film takes LESS HEAT to shrink than what you might be used to. To maximise efficiency, increase your torch speed. You will be able to get the job done faster while using significantly less propane.
Optimising Tape Usage
A major benefit of bioaqualife® shrinkwrap is that any well-set seam does not require taping. You will still need tape to patch the occasional hole and to pad up any sharp objects, etc., and we have a full line of bioTAPE® available just for this.
